Sony DCR-TRV145E Operating Instructions Manual page 273

Changing the menu settings
Icon/item Mode
TAPE SET
REC MODE z SP
AUDIO MODE* 2) z 12BIT
ORC TO SET* 3)
ORC stands for "Optimising the Recording Condition."
q REMAIN z AUTO
2)
FRAME REC* z OFF
INT. REC* 2)
z OFF
* 1) Modes on the POWER switch vary depending on models (p. 26).
2)
*
* 3)
4)
*
Meaning
To record in the SP (Standard Play) mode.
LP To increase the recording time to 1.5*
SP mode.
To record in the 12-bit mode (two stereo sounds).
16BIT To record in the 16-bit mode (one stereo sound with
high quality).
— To automatically adjust the recording condition to get
the best possible recording. Press START/STOP to
start adjustment. Your camcorder takes about 10
seconds to check the tape condition and then returns
to the standby mode.
To display the remaining tape bar:
• For about eight seconds after your camcorder is
turned on and calculates the remaining amount of
tape.
• For about eight seconds after a cassette is inserted
and your camcorder calculates the remaining
amount of tape.
• For about eight seconds after N is pressed in
VCR/PLAYER mode.
• For about eight seconds after DISPLAY is pressed
to display the screen indicators.
• For the period of tape rewinding, forwarding or
picture search in VCR/PLAYER mode.
ON To always display the remaining tape bar.
To deactivate the frame recording.
ON To activate the frame recording (p. 96).
ON To activate the interval recording function (p. 94).
To deactivate the interval recording function.
SET To set INTERVAL and REC TIME for interval
recording.
2) 3)
/2* times the
(continued on the following page)
POWER
switch* 1)
VCR
CAMERA
VCR* 4)
CAMERA
CAMERA
VCR/
PLAYER
CAMERA
CAMERA
CAMERA
273