Code Cards For Adjusting Input/Output 3 - Pepperl+Fuchs PGV...-F200...-R4-V19 Series Manual

PGV...-F200/-F200A...-R4-V19
Appendix
6.1.6

Code Cards for Adjusting Input/Output 3

Parameterization enables you to assign various functions to input/output 3 on the read head.
The following input/output functions are available:
Input: none

Output: Overspeed

Output: Warning

Output: Fault

Output: Event

Output: No position

Input 3: No Function
Figure 6.20
Output 3: Overspeed
Figure 6.21
56
Input/output 3 is defined as an input but has no function.
Input/output 3 is defined as an output. This output carries the potential +U
the defined maximum speed is exceeded.
Input 3
No function
Output 3
Overspeed
as long as
B