Code Cards For Setting The Transfer Rate - Pepperl+Fuchs PGV...-F200...-R4-V19 Series Manual

PGV...-F200/-F200A...-R4-V19
Appendix
Resolution: 10 mm
Figure 6.12
Maximum Length of the Code Tape
Resolution of the read head [mm]
10
1
0.1
6.1.4

Code cards for setting the transfer rate

Parameterization allows you to assign various transfer rates to the reading head for
communication via the interface. The following transfer rates are available:
38400 bit/s

57600 bit/s

76800 bit/s

115200 bit/s

230400 bit/s

Transfer rate: 38400 bit/s
Figure 6.13
The code card assigns a position data resolution of 10 mm to the read head.
The transfer rate of the read head for communication via the interface is preset to
38400 bit/s.
Maximum length of the code tape [km]
10
10
10
Resolution
10 mm
38400 Bit/s
53