Saving Views - RGBlink M2 Quick Start Manual

Saving Views

M2 provides 36 positions for saving or recording parameters. To save current parameters and settings:
1. Push the [SAVE] button in Stored Presets Area, the button [SAVE] and [PAGE] lights are lit, and some of
buttons 1~6 are lit and some are flashing. The button lit can be saved and flash will be overwrite, push the
button lit to save.
2. Select PAGE, for example, the button [2] is lit, push the button [2].
3. After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the button [2]:
4. Push the [SAVE] button again, the button light is off, and exit the save function.
5. Select <Backup To UDisk>, user can save the parameters to the UDisk.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
SAVE TO
->PAGE: 1
BANK: 1
Backup To UDisk
SAVE TO
->PAGE: 2
BANK: 1
Backup To UDisk
SAVE TO
PAGE: 2
->BANK: 2
Backup To UDisk
support@rgblink.com
No UDisk
No UDisk
No UDisk
25
| www.rgblink.com
25 / 28