Table of Contents
Advertisement
Select mask:
Turn the rotary knob, and select <Mask>, push the knob to confirm. Turn the rotary knob, and select the
effects, diamond, round, heart, star, triangle, oval, hexagons, pentagon, 4 point star, 6 point star, lighting,
crescent left and crescent right.
User can also push the layer mask selection button in Layer Mask Area to select the mask.
Mask setting:
M2 supports load file from UDisk, and set the selected layer, including effect & PIC Pos X, Y, effect X, Y and PIC
Pos X, Y.
Custom the mask:
There are 2 custom buttons in Layer Mask Area, push [CUST1] or [CUST2], for example, push [CUST1], it will
enter to the menus as follows:
Turn the rotary knob, and select <Custom 1>, push the knob to confirm. Turn the rotary knob again, and
select the mask, for example, select <Star>, push the knob to confirm.
Then push the [CUST1] button, the custom will change to the mask that set, as shown below:
Transitions Setting
1. Push the transition buttons in Transition Area, M2 supports 8 kinds of wipe modes:
Push the transition button
Push the transition button
Push the transition button
Push the transition button
Push the transition button
Push the transition button
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
->Custom 1
Layer
ON/OFF
Mask&PIC Pox X
->Custom 1
Layer
ON/OFF
Mask&PIC Pox X
, user can select ←＋→.
, user can select ←□→.
, user can select ←O→.
, can select fade.
, can select L→R.
, user can select L←M→R.
support@rgblink.com
Heart
Layer 1
Layer 1
16
|
www.rgblink.com
ON
50
Star
ON
50
16 / 28
Advertisement
Table of Contents
