RGBlink M2 Quick Start Manual page 18

Push the transition button
Push the transition button
2. Push the [TAKE] button, or use T-bar switcher to switch the image to program with selected wipe.
Custom LOGO
Push [MENU] button, and enter to the menu items. Turn the rotary knob, and select <LOGO> option in
<Advance>, push the knob to confirm, (Or push the [LOGO] button in Functions Area) it will enter to the LOGO
menus as below:
Enable the LOGO function:
Turn the rotary knob, select <ON/OFF>, and set "ON" to enable the logo function.
LOGO Setting:
1. Turn the rotary knob, and select <LOGO>, push the knob to confirm.
2. Turn the rotary knob, and select the LOGO that to custom, push the knob to confirm.
3. Turn the rotary knob, select <X> or <Y>, and set the position of LOGO.
Additionally, M2 supports load file from UDisk.
Custom OSD
Push [MENU] button, and enter to the menu items. Turn the rotary knob, and select <OSD> option in
<Advance>, push the knob to confirm, it will enter to the OSD menus as below:
1. Turn the rotary knob, select <ON/OFF>, and select "ON" to enable the OSD function.
2. Turn the rotary knob, select <Delete>, and select "Yes" to delete the OSD.
3. Turn the rotary knob, select <Load File From UDisk>, and select "Yes" to load the OSD file from UDisk.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
, user can select III→.
, user can select LT→RB.
->LOGO
ON/OFF
X
Y
->Delete
Load File From UDisk
->ON/OFF
Delete
Load File From UDisk
support@rgblink.com
1600
No UDisk
OFF
17
| www.rgblink.com
1
OFF
952
1
No
No
17 / 28