Table of Contents
Advertisement
Layer Adjustment Area
SCALE
This button used for size and crop adjusting. If image quality distorts by improper
operation, it can be recover by reset.
POS
This button used for position adjusting. If image quality distorts by improper operation,
it can be recover by reset.
FS
Screen parameters setting button. Push the button, its LED light turns on, user can
choose full size or screen size.
FREEZE
Freeze the image or video.
1
Rotary Knob
For size and position adjustment and confirmation.
Push SCALE and control the rotary knob will active the display window to be ready for
size down.
Push POS and control the rotary knob will active the display window to be ready for
change position.
Joystick
For size and position adjustment.
Push SCALE and control the joystick will active the display window to be ready for size
down.
Push POS and control the joystick will active the display window to be ready for change
position.
Layer Selection Area
A/B/C/D
2
For adding or deleting the layer, the button light is lit when add the layer, off when
delete the layer, and flash when select the layer.
Layer Effect Area
DSK
DSK effect editing button. User can select the layer and set the position in DSK menus.
BLEND
BLEND effect editing button. User can select the layer and set the blending width in
3
BLEND menus.
Rotary Knob
Adjust the alpha of DSK layer.
For DSK and BLEND adjustment and confirmation.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
support@rgblink.com
5
|
www.rgblink.com
5 / 28
Advertisement
Table of Contents
