Configuration Menu - Technogym Jog Forma User Manual

Configuration menu

To customise the software configuration, when in standby press number keys 3 6 9 simultaneously; then enter the password 2406 with the number keys and
confirm with ENTER.
If the password entered is not correct, the software will go back to standby directly.
The configuration menu messages are in two parts:
- the first part gives the name of the parameter;
- the second part gives the individual parameter options.
Press the speed key to go to the next message; to go back to the previous message press the
To scroll the options of the individual parameter press the
To select one of the options and proceed, press ENTER when the chosen option is displayed on the goal dial.
Press the DELETE key to go back to standby. Whenever DELETE is pressed, in whatever message, all the changes made up to that time will be saved. You cannot
exit without saving. If you make a mistake, you can reset the initial Technogym values with default config. (see below).
The following parameters can be edited, in the order given below:

To select the language for the messages.

To select the unit of measurement, either kilometres and kilograms (KM) or miles and pounds (MILES).
or the goal keys.
speed key.
Jog Forma - Advanced LED display
26