Timer_Dtfault - Dti Fault Register - Silicon Laboratories EFR32xG21 Wireless Gecko Reference Manual

19.5.24 TIMER_DTFAULT - DTI Fault Register

Offset
0x0F4
Reset
Access
Name
Bit Name
31:5 Reserved
4 DTEM23F
This bit is set to 1 if EM2 or EM3 entry has occurred and DTEM23FEN is set to 1. The TIMER0_DTFAULTC register can
be used to clear fault bits.
3 DTLOCKUPF
This bit is set to 1 if a core lockup fault has occurred and DTLOCKUPFEN is set to 1. The TIMER0_DTFAULTC register
can be used to clear fault bits.
2 DTDBGF
This bit is set to 1 if a debugger fault has occurred and DTDBGFEN is set to 1. The TIMER0_DTFAULTC register can be
used to clear fault bits.
1 DTPRS1F
This bit is set to 1 if a PRS 1 fault has occurred and DTPRS1FEN is set to 1. The TIMER0_DTFAULTC register can be
used to clear fault bits.
0 DTPRS0F
This bit is set to 1 if a PRS 0 fault has occurred and DTPRS0FEN is set to 1. The TIMER0_DTFAULTC register can be
used to clear fault bits.
silabs.com | Building a more connected world.
Bit Position
Reset Access Description
To ensure compatibility with future devices, always write bits to 0. More information in
ventions
0x0 R DTI EM23 Entry Fault
0x0 R DTI Lockup Fault
0x0 R DTI Debugger Fault
0x0 R DTI PRS 1 Fault
0x0 R DTI PRS 0 Fault
Reference Manual
TIMER - Timer/Counter
1.2 Con-
Rev. 0.4 | 481