Tools In Print Interface; Details Interface - Flashforge Creator3 User Manual

a
b
c
d
Creator3 User Guide | www.flashforge.com
To set Extruder/Platform temperature during
printing:
After
temperature, temperature figure will be
underlined in print interface,
Tap [Yes] to save the setting while tap [No]
to cancel the setting.

Tools in print interface

Filament: To change filament during
1
printing. (Note: You need to suspend
2
printing first.)
3
Light off:
To turn off the light during printing.
 Details: To check the details interface
during printing.

Details Interface

a.Printing speed: To change printing speed
during printing by tapping the underlined
speed figure.
b.Filament used
c.Time needed
e
d. Z axis position
To set the printing speed during printing:
Tap [Yes] to save the setting while tap [No]
to cancel the setting.
16
temperature has reached
400-699-1063
target