Slice And Export The 3D Model; Build The 3D Model; Basic 3D Printing Process - Flashforge Creator3 User Manual

·From the Cloud The most popular way of obtaining a 3D model is to download it
from websites that allow users to upload 3D models that they designed.
Flashforge Cloud: cloud.sz3dp.com
E.g. : www. thingiverse.com

1.1.2 Slice and Export the 3D Model:

Slice software is the software that prepares 3D models for printing and turns them into
instructions for the 3D printers. FlashPrint is the slicing software used for the
FlashForge Creator3.
Using FlashPrint, you can turn .stl files into .g or .gx files for printing. Then the files
can be transferred to your Creator3 via USB stick, Wi-Fi or Ethernet cable.

1.1.3 Build the 3D Model:

Once the output file has been transferred to your Creator3, it will start to turn the 3D
model into a physical object by laying down layers of filament.
1.1.4 Basic 3D Printing Process：
Install printer
First
Print
Install software
Print model
Daily
Print
After print
Processing
Creator3 User Guide | www.flashforge.com
Printer Unboxing
Accessories check
Install software
Acquire Load in
model
model
Take down Remove
model supports
10
Filament Loading
Start software
Adjust
Set printing
model
parameters
400-699-1063
Distribute
print jobs