Direction Indicators Switch; Joystick Button; Horn Button; Heated Grips Switch (If Fitted) - Triumph Scrambler 1200 XE Owner's Handbook Manual

General Information

Direction Indicators Switch

When the indicator switch is pushed
to the left or right and released, the
corresponding
will flash on and off. To turn off the
indicators, push and release the switch
in the central position.
There are three direction indicators
options:
Auto Basic - The self-cancelling
•
function is
indicators will activate for eight
seconds and
metres.
Auto Advanced - The self-cancelling
•
function is
activates the direction indicators
for three flashes. A longer press
activates the direction indicators for
eight seconds and an additional 65
metres.
Manual
• -
function is
indicators must
cancelled using
indicator switch.
To select a direction indicator option,
refer to the Bike Setup section on
page 45.
The indicators
manually. To manually turn off the
indicators, press
indicator switch in the central position.

Joystick Button

The Joystick is used to operate the
following functions of the instruments:
• Up - scroll the menu from the
bottom to the top
• Down - scroll the menu from the top
to the bottom
64
direction indicators
on. The direction
an additional
on. A short press
The self-cancelling
off. The direction
be manually
the direction
can be cancelled
and release
• Left - scroll the menu to the left
• Right - scroll the menu to the right
• Centre - press to confirm selection.

Horn Button

When the horn button is pushed, with
the ignition ON, the horn will sound.

Heated Grips Switch (if fitted)

The heated grips will only heat when
the engine is running.
65
When the heated grips are switched on,
the heated grips symbol will appear in
the display and the selected heat level
will be shown.
There are three levels of heat: low,
medium and high. This is indicated by
the different colours of the symbols
shown in the instrument display.
1
1. Low heat symbol (yellow)
2. Medium heat symbol (orange)
3. High heat symbol (red)
For maximum benefit in cold conditions,
from the OFF position press the switch
once for the high heat setting initially
the
and then reduce the heat level by
pressing the switch again for a low heat
setting when the grips have warmed up.
To turn off the heated grips, press and
release the switch until the heated
grips symbol is no longer shown in the
display.
2 3