Triumph Scrambler 1200 XE Owner's Handbook Manual page 39

• Select Trip 1 or Trip 2 by pushing the
joystick down/up.
Note
Trip 2 meter can be shown or hidden
from the information tray. For more
information, see page 48.
To reset a trip meter:
• Select the trip meter to be reset.
• Press and hold the joystick centre
for more than one second.
• The trip meter will then be reset.
The trip meter can also be reset from
the Main menu, see page 47.
Fuel
The Fuel status information tray shows
fuel consumption information.
1
Fuel
HOLD TO RESET
5
1. Fuel symbol
2. Average fuel consumption
3. Instantaneous fuel consumption
4. Range to empty
5. Fuel information tray
Average Fuel Consumption
This is an indication of the average
fuel consumption. After being reset the
display will show dashes until 0.1 miles/
km has been covered.
15:53
A
+
35.8
mpg
+
N
42.2
mpg
22.8
RANGE
mi
General Information
Instantaneous Fuel Consumption
An indication of the fuel consumption
at an instant in time. If the motorcycle
is stationary, --.- will be shown in the
display area.
Range to Empty
This is an indication of the predicted
distance that can be travelled on the
remaining fuel in the tank.
Reset
To reset the average fuel consumption,
press and hold the joystick centre.
Note
After refuelling, the fuel gauge and
range to
be updated
motorcycle. Depending on the riding
style, updating could take up to five
minutes.
Coolant
2
The coolant information tray menu
indicates the temperature of the engine
3
coolant.
4
12.4
°
C
1. Coolant symbol
2. Coolant information tray
3. Coolant temperature gauge
empty information
only while riding
1
N
Coolant
Temperature OK
68°C
2
will
the
15:53
A
H
C
3
39