Traction Control (Tc) Disabled Warning Light; Direction Indicators; Hazard Warning Lights; High Beam Light - Triumph Rocket 3 TFC 2020 Owner's Handbook Manual

Table of Contents

Advertisement

If
the
traction
functioning, care must be taken when
accelerating and cornering on wet/
slippery road surfaces to avoid rear
wheel spin.
Do not continue to ride for longer
than is necessary with the engine
management
Indicator Light (MIL) and traction
control
warning
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked.
Hard acceleration and cornering in this
situation may cause the rear wheel
to spin resulting in loss of motorcycle
control and an accident.
If traction control is switched on:
Under normal riding conditions the
TC indicator light will remain off.
The TC indicator light will flash
rapidly when the traction control
system is working to limit rear
wheel slip during periods of hard
acceleration
slippery road conditions.
If traction control is switched off:
The TC indicator light will not
illuminate. Instead the TC disabled
warning light will be illuminated.
Note
Traction control will not function if there
is a malfunction with the ABS system.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
Warning
control
is
system
Malfunction
lights
illuminated.
or
under
wet
Traction Control (TC) Disabled
Warning Light
not
If the warning light becomes illuminated
at any other time while riding, it
indicates
system has a malfunction that requires
investigation.

Direction Indicators

off at the same speed as the direction
indicators.

Hazard Warning Lights

To turn the hazard warning lights on
or off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
or
if the ignition is switched off, until the
hazard warning light switch is pressed
again.

High Beam Light

dip and high beam.
Instruments
The TC disabled warning light
should not illuminate unless
traction control is switched
off or there is a malfunction.
that
the
traction
When the direction indicator
switch is turned to the left or
right, the direction indicator
warning light will flash on and
When the high beam button is
pressed the high beam will be
switched on. Each press of
the button will swap between
control
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents