Traction Control Settings; Abs Enable - Triumph Scrambler 1200 XE Owner's Handbook Manual

Traction Control Settings

If the traction control is disabled, the
motorcycle will handle as normal but
without traction control.
In this situation accelerating too hard
on wet/slippery road surfaces may
cause the rear wheel to slip, and may
result in loss of motorcycle control and
an accident.
The traction control system can be
disabled as described in Bike Setup
on page 46, or set to the conditions
described in Riding Mode Configuration
on page 43.
Warning
General Information

ABS Enable

If the ABS has been disabled when
riding in a particular riding mode, it
can be re-enabled with the motorcycle
stationary or moving.
To enable the ABS system when the
motorcycle is stationary, do one of the
following:
• Turn the ignition OFF and then ON.
• With the ignition ON, press and hold
the MODE button for more than one
second.
The ABS will be enabled when the
motorcycle reaches a speed exceeding
6 mph (10 km/h). The ABS warning light
will turn off.
To enable the ABS system when the
motorcycle is moving, do the following:
• Press and hold the MODE button for
more than one second.
71