Changing Gears - Triumph Scrambler 1200 XE Owner's Handbook Manual

Hide thumbs Also See for Scrambler 1200 XE:
Table of Contents

Advertisement

How to Ride the Motorcycle

Changing Gears

Warning
Take care to avoid opening the throttle
too far or too fast in any of the lower
gears as this can lead to the front
wheel lifting from the ground (pulling a
'wheelie') and to the rear tyre breaking
traction (wheel spin).
Always open the throttle cautiously,
particularly if you are unfamiliar with
the motorcycle, as a 'wheelie' or loss of
traction will cause loss of motorcycle
control and an accident.
Warning
Do not change to a lower gear at
speeds
that
will
engine rpm (r/min). This can lock the
rear wheel causing loss of control and
an accident.
Engine damage may also be caused.
Changing down should be done so that
low engine speeds will be ensured.
1
1.
Gear change pedal (6 speed shown)
94
cause
excessive
6
5
4
3
2
N
1
To change gear:
Close the throttle while pulling in the
clutch lever.
Change into the next higher or
lower gear.
Open the throttle part way, while
releasing the clutch lever. Always
use the clutch when changing gear.
Note
The gear change mechanism is the
'positive stop' type. This means that,
for each movement of the gear change
pedal/lever, you can only select each
gear, one after the other, in ascending
or descending order.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents