Front Brake Fluid Level Inspection And Adjustment; Rear Brake Fluid Level Inspection - Triumph Scrambler 1200 XE Owner's Handbook Manual

Maintenance and Adjustment
Front Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause
performance potentially leading to loss
of motorcycle control and an accident.
Inspect and adjust the brake fluid level
as described below.
1
2
3
jajc_3
1. Reservoir cap retaining screws
2. MAX level line
3. MIN level line
The brake fluid level in the reservoir
must be kept between the MAX and MIN
level lines (reservoir held horizontal).
To adjust the brake fluid level:
• Release the reservoir cap retaining
screws and remove the reservoir
cap and the diaphragm seal.
130
your authorised
reduced brake
• Fill the reservoir to the MAX level
line using new DOT 4 fluid from a
sealed container.
• Refit the reservoir cap making sure
that the diaphragm seal is correctly
positioned between the reservoir
cap and reservoir body.
• Tighten the reservoir cap retaining
screws to 1 Nm.

Rear Brake Fluid Level Inspection

Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult
Triumph dealer for advice before riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause
performance potentially leading to loss
of motorcycle control and an accident.
The rear brake fluid reservoir is located
under the sprocket cover on the left
hand side of the motorcycle.
1. UPPER level
2. LOWER level
your authorised
reduced brake
1
2