Tyre Pressure Monitoring System (If Fitted); Tyre Wear - Triumph Scrambler 1200 XE Owner's Handbook Manual

Tyre Pressure Monitoring System
(if fitted)
An adhesive label is fitted to the wheel
rim to indicate the position of the tyre
pressure sensor.
Care must be taken when replacing
the tyres to prevent any damage to
the tyre pressure sensors.
Always have your tyres fitted by your
authorised Triumph dealer and inform
them that tyre pressure sensors are
fitted to the wheels.
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor's orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage caused
anti puncture
maintenance is
manufacturing defect and will not be
covered under warranty.
Always have your tyres fitted by your
authorised Triumph dealer and inform
them that tyre pressure sensors are
fitted to the wheels.
Caution
Caution
by the use
fluid or incorrect
not considered
Maintenance and Adjustment
The tyre pressures shown on your
instruments indicate the actual tyre
pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre
to expand and increase the inflation
pressure. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust
the tyres are cold using an accurate
pressure gauge. Do not use the tyre
pressure display on the instruments.

Tyre Wear

As the tyre tread wears down, the tyre
becomes more susceptible to punctures
and failure. It is estimated that 90%
of all tyre problems occur during the
last 10% of tread life (90% worn). It is
recommended that tyres are changed
before they are worn to their minimum
tread depth.
of
a
tyre pressures when
145