Triumph Scrambler 1200 XE Owner's Handbook Manual page 28

Hide thumbs Also See for Scrambler 1200 XE:
Table of Contents

Advertisement

General Information
Note
The low oil pressure warning light will
illuminate if the ignition is switched ON
without running the engine.
Immobiliser/Alarm Indicator Light
This Triumph motorcycle is fitted with
an engine immobiliser which is activated
when the ignition switch is turned to
the OFF position.
Without Alarm Fitted
When the ignition switch is turned to
the OFF position, the immobiliser light
will flash on and off for 24 hours to
show that the engine immobiliser is on.
When the ignition switch is turned to
the ON position the immobiliser and the
indicator light will be off.
If the indicator light remains on it
indicates that the immobiliser has a
malfunction that requires investigation.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
With Alarm Fitted
The
immobiliser/alarm
only illuminate when the conditions
described
in
the
accessory alarm instructions are met.
Anti-Lock Braking System (ABS)
Warning Light
When the ignition switch is
turned to the ON position, it is
normal that the ABS warning
light will flash on and off. The
light will continue to flash after engine
start-up
until
reaches
a
speed
(10 km/h) when it will go off.
28
light
genuine
Triumph
the
motorcycle
exceeding
6 mph
Note
Traction control will not function if
there is a malfunction with the ABS.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
The warning light will not illuminate
again until the engine is restarted
unless there is a fault, or the ABS is
disabled by the rider.
If the ABS is disabled by the rider the
warning light will illuminate until the
ABS is enabled again.
If there is a fault with the ABS system
the warning light will be illuminated and
the general warning symbol will flash.
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS braking system.
Do not continue to ride for longer than
is necessary with the indicator light
illuminated.
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified. In this situation
will
braking too hard will cause the wheels
to lock resulting in loss of motorcycle
control and an accident.
Traction Control (TC) Indicator Light
during periods of hard acceleration or
under wet or slippery road conditions.
first
Warning
The TC indicator light is used
to indicate that the traction
control system is active and is
working to limit rear wheel slip

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents