Rear Brake Pedal Adjustment - Triumph Scrambler 1200 XE Owner's Handbook Manual

Maintenance and Adjustment
• Detach the rear brake fluid reservoir
from the sprocket cover.
1
1. Sprocket cover
2. Rear brake fluid reservoir
• Release the
reservoir cap retaining screws and
remove the reservoir cap noting the
position of the sealing diaphragm.
• Fill the reservoir to the UPPER level
line using new DOT 4 fluid from a
sealed container.
• Refit the reservoir cap making sure
that the diaphragm seal is correctly
positioned between the reservoir
cap and the reservoir body.
• Tighten the
retaining screws to 1 Nm.
• Reattach the
reservoir to the sprocket cover.
• Refit the sprocket middle cover and
tighten the new fixing to 3 Nm.
• Refit the sprocket outer cover and
tighten the fixings to 9 Nm.
132
2
rear brake fluid
reservoir cover
rear brake fluid

Rear Brake Pedal Adjustment

Warning
The rear brake pedal may require
pressure to be applied to adjust it.
The rear brake pedal has sharp edges
that may cause injury to the hands
and fingers when applying pressure to
adjust it.
When adjusting the rear brake pedal
wear suitable gloves to avoid injury to
the hands and fingers.
Scrambler 1200 XE Only
1. Rear brake pedal
The rear brake
adjustable.
To adjust the rear brake pedal height:
• Lift the rear brake pedal up and
rotate it 180°. This will adjust the
height by +/- 10 mm.
1
pedal is height