Cruise Control Indicator Light
Cruise control can only be
activated
when
motorcycle is travelling at a
speed between 19 to 100 mph
(30 to 160 km/h) and is in 3
higher. When activated, the cruise
control light in the instrument panel is
illuminated.
Warning
Cruise control must only be used
where you can ride safely at a steady
speed.
Cruise control should not be used
when riding in heavy traffic, on roads
with sharp/blind bends or when they
are slippery.
Using cruise control in heavy traffic,
on roads with sharp/blind bends or
when they are slippery, may result in
loss of motorcycle control and an
accident.
General Information
Neutral
The
the
indicates
transmission is in neutral (no
gear selected). The warning light will
rd
gear or
illuminate when the transmission is in
neutral with the ignition switch in the
ON position.
High Beam
When the ignition is switched
on and the headlight dip
switch is set to high beam, the
high beam warning light will illuminate.
Low Fuel
The low fuel indicator will
illuminate
approximately 4.5 litres of fuel
remaining in the tank.
Direction Indicators
When the direction indicator
switch is pushed to the left or
right,
direction indicator light will flash on and
off at the same speed as the direction
indicator.
Both direction indicator lights will flash
simultaneously
warning lights are activated.
neutral
warning
light
when
the
when
there
are
the
corresponding
when
the
hazard
27