Front Suspension; Front Suspension Settings - Triumph Scrambler 1200 XE Owner's Handbook Manual

• Reposition the lifting device and
repeat the procedure for the rear
wheel.
• Remove the support and place the
motorcycle on the side stand.
Note
If the wheel bearings in the front or
rear wheel allow play in the wheel hub,
are noisy, or if the wheel does not turn
smoothly, have your authorised Triumph
dealer inspect the wheel bearings.
Maintenance and Adjustment

Front Suspension

Make sure that the adjusters are set
to the same setting on both front
suspension units.
Settings that vary from left to right
may affect handling and stability
resulting in loss of motorcycle control
and an accident.
Make sure that the correct balance
between front and rear suspension is
maintained.
Suspension
significantly
characteristics
control and an accident.
Refer to
information or consult your authorised
Triumph dealer.
The Standard
provides a comfortable ride and good
handling characteristics for general,
solo riding. The following tables show
suggested
suspension.

Front Suspension Settings

The motorcycle is delivered from the
factory with all the suspension settings
set at the Standard setting, as shown in
the relevant suspension tables.
The settings shown in the tables are
only a guide. Setting requirements may
vary for rider and passenger weight and
personal preferences.
Warning
Warning
imbalance
change
leading to
the table for
suspension
settings for the
could
handling
loss of
further
setting
front
137