Error Messages And Troubleshooting; General Errors - Siemens SIMATIC FC 45 Function Manual

Error messages and troubleshooting

5.1

General errors

5.1
Automation system switches to STOP
• OB 86 not programmed and a slave has failed.
• A slave has failed, and OB122 is not programmed.
The error does not occur until FC 45 is called.
• The pointer Params_DB, command_DB or DAT_DB does not exist or is pointing to a non-
FC 45
Function manual, Release 03/2006 , J31069-D0167-U001-A2-7618
existent address area.
5
5-1