Table of Contents
Advertisement
Description
The FC 45 is a STEP7 function for MOBY identification technology. It can be used with both
the SIMATIC S7-300 and S7-400 for various MOBY interface modules.
Figure 2-1
Section "Brief description of ASM hardware" illustrates configurations with the various
interface modules. The FC 45 can be operated in various different configurations:
• The interface module is operated directly in a SIMATIC S7-300.
• The interface module is located in the rack of an ET 200M or ET 200X. The
• Since the interface module is a self-contained PROFIBUS slave, it is linked with the
These configurations can be mixed. Different interface modules can also be connected.
Features of the interface
For the features of the individual interface modules, see Section "Brief description of ASM
hardware".
Since the features of the individual ASMs are continuously being added to, you should
always use the latest edition of this description.
FC 45
Function manual, Release 03/2006 , J31069-D0167-U001-A2-7618
Interface modules for FC 45
ET200M/ET200X is used on an S7-300 or S7-400.
integrated PROFIBUS connection to a SIMATIC S7-300 or S7-400.
2
2-1
Advertisement
Table of Contents
