Download  Print this page

Error And Status Messages - Siemens SIMATIC Ident Installation Manual

Simatic 3964r protocol for windows 9x/xp/7.
Hide thumbs

Advertisement

4.2

Error and status messages

Messages returned by the functions described in the previous section can be divided into
three classes:
● Positive status messages
● Status error messages
● System error messages
The following error codes are defined in the header file "3964r.h".
Positive status messages
Used by:
The status messages are returned when:
● an operation was completed successfully
● an event was not evaluated as an error
Status messages
COM_ST_FREE
COM_ST_BUSY
COM_ST_SUCCESS
SIMATIC 3964R protocol for Windows 9x/XP/7
Installation Manual, 01/2013, J31069-D0131-U001-A2-7218
• ComReadState
• ComWriteState
Everything OK, no job present
A job is currently being processed, no error has occurred up to now.
The last operation was completed successfully.
Programming interface
4.2 Error and status messages
23

Advertisement

   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

Comments to this Manuals

Symbols: 0
Latest comments: