Steering Select Switch; Boom Control - Xtreme Manufacturing XR1147 Operation And Safety Manual

Steering Select Switch

DO NOT change steering modes until the Telehandler
slows or comes to a complete stop. Align all four (4) wheels
perpendicular to the axle, before changing steering mode.
Changing steering modes at higher travel speeds can make
the Telehandler unstable, and cause a loss of control, which
could result in death, serious injury, or property damage.
The Steering Select switch has three (3) steering positions:
Crab, Two Wheel Steering (2W), and Four Wheel Steering (4W).
Figure 45. Steering Select and 2-Wheel Rear Switches
Outrigger Control
The outrigger toggle switches are used to lower and raise the
outriggers. The outrigger indicators illuminate when the out-
riggers are fully extended and on the ground.
Figure 46. Outrigger Toggle Switches
Once outriggers are fully extended, the transmission is disen-
gaged, and the frame sway is locked. Frame sway lock can be
overridden with the frame sway override switch.
Operation Manual
Warning
Figure 47. Outriggers Down
Figure 48. Outriggers Up

Boom Control

Sway
Enable
Button
Joystick
Enable
Trigger
Figure 49. Boom Control Joystick
42
Operator Cab
Aux Button 1
Aux Button 2
Attachment Tilt
Control Thumbstick