Steering Select Switch - Xtreme Manufacturing XR630 Operation And Safety Manual

XR630
Fig 54. Hazard Switch
Wiper Switch
The Wiper Switch operates the windshield wiper on enclosed
cab models. The switch has three (3) positions: Down - OFF,
Up - On, Hold Up - Wash. The wiper switch is accessed from the
Settings Screen, through the CAN Switches screen.
Fig 55. Wiper Switch
Operation Manual
Steering Mode Select Switch
DO NOT change steering modes until the Telehandler comes
to a complete stop. Align all four (4) wheels perpendicular to
the axle, before changing steering mode. Changing steering
modes at higher travel speeds can make the Telehandler
unstable, and cause a loss of control, which could result in
death, serious injury, or property damage.
The Telehandler includes three STANDARD modes of steering:
• Crab Steering
• Two Wheel (2W)
• Four Wheel (4W)
Select the appropriate steering mode using one of the three
steering mode switches located within the Steering Cluster in
the Main Switch cluster screen. This screen is accessed from
the Settings screen, touching the CAN Switches button.
See the Settings paragraph for mode details.
Fig 56. Steering Select and 2-Wheel Rear Switches
42
Operator Cab
Warning