Xtreme Manufacturing XR1147 Operation And Safety Manual page 61

Operation
Figure 77. Raise Boom Until Pivot Pins (A) Are Fully Seated in Attachment
Hooks (B)
5. Tilt the attachment up slightly. The quick attach adapter
should be tight against the rear of the attachment. Align the
holes between the quick attach adapter and attachment.
Figure 78. Tilt Attachment To Align Holes Between Quick Attach Adapter
(1) and Attachment (2).
2
Figure 79. Quick Attach Lock Lever.
6. Raise the quick attach lock lever.
7. With lock lever raised, insert quick attach pin completely
through the attachment and quick attach adapter.
Figure 80. Insert Quick Attach Pin Through Attachment and Quick Attach
1
Adapter.
8. Release the quick attach lock lever and make sure it has
lowered and seated itself in groove (A) of the quick attach pin.
9. Connect the quick attach couplers (this only applies to at-
tachments with a quick attach hydraulic system).
61 Operation Manual