Xtreme Manufacturing XR1147 Operation And Safety Manual page 41

Operator Cab
It calibrates the first clutch, and upon successful calibration it
moves to the second and so forth. The Telehandler must be
OFF after calibration is complete.
Figure 40. First Clutch Calibration Successful
DIAGNOSTICS
Pressing the ENGINE DIAGNOSTICS soft button will display
engine information. Use the up/down buttons to navigate
Press the MENU button to return to the GAUGE DISPLAY mode.
Figure 41. Diagnostics Menu
USER SETTINGS
Pressing the USER SETTINGS soft button will enter a mode
where some display settings may be adjusted using the Up/
Down buttons. The top left button restore the default settings.
Figure 42. User Settings
Each Restore Defaults needs to be confirmed or canceled on
the next screen. Pressing the MENU button will return to the
previous menu.
Figure 43. Diagnostics Menu
REGENERATION MENU
Pressing the ENTER button while in GAUGE DISPLAY mode or
pressing the REGEN MENU soft button will bring up a menu
that displays the exhaust system regeneration mode with the
available options. The operator may disable an automatic
regen or force a manual regeneration from this menu (a
manual regen can only be initiated if the system is requesting
it). Pressing the ENTER button will return to the GAUGE
DISPLAY mode.
Figure 44. Regeneration Screen
FAULT CONDITION POP-UPS
A fault condition may trigger a pop-up dialog box describing
the nature of the fault.
BACKUP CAMERA (OPTIONAL)
The display automatically changes to backup camera when
the transmission is in REVERSE. When the transmission is in
NEUTRAL or FORWARD, the display can be switched from the
GAUGE DISPLAY to the BACKUP CAMERA by using the select
button CAM. Press it again to return to the GAUGE DISPLAY.
41 Operation Manual