Xtreme Manufacturing XR1147 Operation And Safety Manual page 40

Figure 34. Engine Diagnostics
CLOCK SETUP
Pressing the CLOCK SETUP soft button will enter a menu
where the clock can be setup or adjusted.
Figure 35. Clock Setup Menu
SERVICE REMINDERS
Pressing the SERVICE REMINDERS soft button will display data
pertaining to maintenance schedules.
Figure 36. Service Reminders Menu
If a scheduled service is due, the GAUGE DISPLAY indicates be-
low the tachometer in the hour meter box, the service needed.
Operation Manual
Figure 37. Service Requested
TRANSMISSION CALIBRATION
After each transmission oil change the transmission needs
to be re-calibrated to accommodate for clutch wear. When
the EZCal button is pressed, the TCU (Transmission Control
Unit) enters transmission calibration mode and it checks
Figure 38. Transmission Calibration - Machine Conditions Check
first for all the machine conditions necessary for a successful
transmission calibration. It displays a green check symbol to
the right of the condition if it is met.
When all of the machine conditions for calibration are met,
the TCU enters clutch calibration mode.
Figure 39. Clutch Calibration
40
Operator Cab