Table of Contents
Advertisement
XRM945
Coolant Gauge
The coolant gauge indicates the temperature of the
coolant in the engine cooling system. Normal engine
coolant temperature reads between 180 to 200°F.
If the coolant gauge shows abnormal readings, stop the
forklift, follow proper shut down procedures, tag the
forklift with "Do Not Operate" tags, and have a qualified
mechanic service or repair the forklift BEFORE placing it
into service again.
Figure 6-28. Coolant Gauge.
Worklight Switch
The Worklight switch controls the two (2) front worklights.
Toggle the Worklight switch up to turn ON and down to
turn OFF the worklights.
Figure 6-29. Worklight Switch.
Figure 6-30. Front Worklights.
For information call (800) 497-1704
Rear Axle Centering Indicator
The rear axle centering indicator illuminates when the rear
wheels are aligned perpendicular to the rear axle. The
rear axle must be aligned perpendicular to change the
Steering Select switch.
If the rear axle centering indicator does not illuminate,
stop the forklift, follow proper shut down procedures,
tag the forklift with "Do Not Operate" tags, and have a
qualified mechanic service or repair the forklift BEFORE
placing it into service again.
Figure 6-31. Rear Axle Centering Indicator.
Steering Select Switch
Caution
DO NOT change steering modes until the forklift
comes to a complete stop. Align all four (4) tires
"straight-ahead", or perpendicular to the axle, before
changing steering mode.
The Steering Select switch has three (3) steering
positions: Crab, Two Wheel Steering (2W), and Four
Wheel Steering (4W).
Figure 6-32. Steering Select Switch.
Operator Cab
Page 37
Advertisement
Table of Contents
