Safety; Symbols Relevant To Safety; Intended Use; General Safety Instructions - Pepperl+Fuchs ODT-MAC400 Series Manual

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*

Safety

3 Safety
3.1

Symbols relevant to safety

Danger!
This symbol indicates a warning about an immediate possible danger.
In case of ignoring the consequences may range from personal injury to death.
Warning!
This symbol indicates a warning about a possible fault or danger.
In case of ignoring the consequences may cause personal injury or heaviest
property damage.
Caution!
This symbol indicates a warning about a possible fault.
In case of ignoring the devices and any connected facilities or systems may be
interrupted or fail completely.
3.2

Intended use

The ODT-MAC4**-LD-RD-MC stationary reader is intended to be used only for the
identification of objects by means of 1D- and 2D-codes.
Always operate the device as described in these instructions to ensure that the
device and connected systems function correctly. The protection of operating
personnel and plant is only guaranteed if the device is operated in accordance
with its intended use.
3.3

General safety instructions

Class 2 laser product
This device is a class 2 laser product:
Standards
IEC 60825-1:2007 certified. Complies with 21 CFR 1040.10 and 1040.11 except
for deviations pursuant to Laser Notice No. 50, dated 06-24-07.
6