ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
Industrial/Standard 2 of 5 (2 bar start/stop codes)
In the Straight 2 of 5 tab (2 bar start/stop codes), you can either activate or
deactivate detection of the Straight 2 of 5 code (2 bar start/stop codes).
Minimum code length: Specifies the minimum size of the code that is to
■
be detected.
Example:
Industrial/Standard 2 of 5 (3 bar start/stop codes)
In the Straight 2 of 5 tab (3 bar start/stop codes), you can either activate or
deactivate detection of the Straight 2 of 5 code (3 bar start/stop codes).
Minimum code length: Specifies the minimum size of the code that is to
■
be detected.
Example:
Telepen Code
In the Telepen tab, you can either activate or deactivate detection of the Telepen
code.
Example:
43