Commissioning; Connecting The Stationary Reader - Pepperl+Fuchs ODT-MAC400 Series Manual

Stationary reader for all common 1d- and 2d-barcodes

Table of Contents

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*

Commissioning

6.1

The reader has its own web server. You have the option of making settings on the

stationary reader using a standard web browser.

Aligning the stationary reader

To find the ideal alignment for the device, use the two laser diodes in the

stationary reader.

1. Supply power to the reader via the D-Sub connector.

2. Adjust the stationary reader so that both points generated by the laser diodes

are positioned on top of each other on the code to be read.

code to be read.

This sets the ideal reading distance between the stationary reader and the

Table of Contents

Odt-mac401 series Odt-mac403 series