Pepperl+Fuchs ODT-MAC400 Series Manual page 42

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
NEC 2 of 5
In the NEC 2 of 5 tab, you can either activate or deactivate detection of the NEC 2
of 5 code.
■
■
GS1 DataBar (RSS)
The RSS (Reduced Space Symbology) tab allows you to select the different
detection options of the RSS code.
Example:
42
Checksum handling: This feature enables you to activate or deactivate
checking of the checksum using one of two options. One option is to
compare the read code with the checksum and then to output the code with
the checksum (check). The other option is to compare the code that has
been read with the checksum and then to output the code without the
checksum (check & remove).
Minimum code length: Specifies the minimum size of the code that is to
be detected.