Pepperl+Fuchs ODT-MAC400 Series Manual page 46

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
Postal Code
In the Postal Code tab, you can either activate or deactivate detection of the Postal
code.
■
■
■
■
Example:
46
Direction angle: Enter the direction angle of the code here.
Omnidirectional is the standard setting, although this means that it will take
longer to read the code.
Australia Post Code with zero FCC & DPID activated: Activate or
deactivate the Australia Post Code with zero FCC & DPID.
Number of lines: Enter the minimum and maximum number of lines in the
code.
Output of non-decodable symbols in the field (mm): Enter the field in
which non-decodable symbols are located that need to be detected.