Pepperl+Fuchs ODT-MAC400 Series Manual page 37

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
Codabar
In the Codabar tab, you can either activate or deactivate detection of the Codabar
code. You can also activate or deactivate the checksum checker.
Checksum handling: This feature enables you to activate or deactivate
■
checking of the checksum using one of two options. One option is to
compare the read code with the checksum and then to output the code with
the checksum (check). The other option is to compare the code that has
been read with the checksum and then to output the code without the
checksum (check & remove).
Permit smaller quiet zone: Codes with smaller quiet zones are also
■
decoded.
Example:
Codablock A
In the Codablock A tab, you can either activate or deactivate detection of the
Codablock A code.
Example:
Codablock F
In the Codablock F tab, you can either activate or deactivate detection of the
Codablock F code.
Example:
37