Pepperl+Fuchs ODT-MAC400 Series Manual page 38

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
Code 11
In the Code 11 tab, you can either activate or deactivate detection of the Code 11
code.
■
Example:
Code 39
In the Code 39 tab, you can either activate or deactivate detection of the Code 39
code.
■
■
■
Example:
38
Checksum handling: This feature enables you to activate or deactivate
checking of the checksum using one of two options. One option is to
compare the read code with the checksum and then to output the code with
the checksum (check). The other option is to compare the code that has
been read with the checksum and then to output the code without the
checksum (check & remove).
Checksum handling: This feature enables you to activate or deactivate
checking of the checksum using one of two options. One option is to
compare the read code with the checksum and then to output the code with
the checksum (check). The other option is to compare the code that has
been read with the checksum and then to output the code without the
checksum (check & remove).
ASCII decoding activated: Specifies whether ASCII decoding has been
activated or not.
Permit smaller quiet zone: Codes with smaller quiet zones are also
decoded.