Operation; Web-Based Operator Interface - Pepperl+Fuchs ODT-MAC400 Series Manual

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*

Operation

7 Operation
7.1

Web-based operator interface

You have the option of configuring and operating the sensor via a web-based
operator interface and using it to display information. The web-based user
interface should be used only for setup and troubleshooting purposes when the
machine is shut down.
Note!
To start the operator interface of the sensor, you need a standard web browser
(e.g., Windows Internet Explorer or Mozilla Firefox) with Java script activated.
We recommend the following browser versions
Firefox
Internet
Explorer
Starting the operator interface
To start the operator interface, proceed as follows.
In the input field of a standard web browser, enter the IP address of the stationary
reader (192.168.2.2) and press return to confirm.
The following tab opens as the start page: Settings.
18
3.6.8 or higher
6.0.2900.2180 or higher
Communication between MAC and
PC via LAN interface
Communication between MAC and
PC via LAN interface