Pepperl+Fuchs ODT-MAC400 Series Manual page 40

ODT-MAC400-* / ODT-MAC401-* / ODT-MAC403-*
Operation
Hong Kong Code
In the Hong Kong Code tab, you can either activate or deactivate detection of the
Hong Kong code.
■
Interleaved 2 of 5
In the Interleaved 2 of 5 tab, you can either activate or deactivate detection of the
Interleaved 2 of 5 code.
■
■
■
Beispiel:
40
Minimum code length: Specifies the minimum size of the code that is to
be detected.
Checksum handling: This feature enables you to activate or deactivate
checking of the checksum using one of two options. One option is to
compare the read code with the checksum and then to output the code with
the checksum (check). The other option is to compare the code that has
been read with the checksum and then to output the code without the
checksum (check & remove).
Permit smaller quiet zone: Codes with smaller quiet zones are also
decoded.
Minimum code length: Specifies the minimum size of the code that is to
be detected.