Table of Contents
Advertisement
SAFETY
This is the safety alert symbol. When you see this symbol on your machine be alert to
the potential for personal injury.
Carefully read all safety messages in these instructions and on your machine safety
signs. Keep safety labels in good condition. Replace missing or damaged labels.
Employer is responsible to perform a hazard/PPE assessment before work activity.
Label Part No.
84395
Additional Safety Warnings:
• Operation of the drill press incorrectly, or on a dangerous fashion can result in serious
injury or death, damage to the machine, it's components, or cutting tool.
• The drill press is designed for drilling and boring operations. Cautions is required when
operating the drill press because it can be dangerous due to the high spindle rotation
speed.
• Guards such as pully cover and chuck guard must be in place and in working condition to
prevent hazard.
• Switch the power off before setting, inspecting, lubricating, cleaning, or changing the drill
bit.
• Always wear eye protection.
Label Part No.
76462
Label Part No.
300168
6
Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
Label Part No.
82199
REV012019
Advertisement
Table of Contents
