Safety Points - Dake 972210 Owner's Manual

BEFORE USE, ALL SAFETY POINTS MUST BE READ AND UNDERSTOOD!
Before the PRESS is used, the instruction manual with this machine must be read and
understood. This manual offers safe operation instructions. Offered below are safety
instructions designed for the press and general safety instructions that apply to
.
most machinery
Intend use :
This machine is intended to be operated by one person. This person should be
conscious of the press ram movement not only for himself but also for persons in the
immediate area of the machine. Caution is required when operating the press because
it can be dangerous due to the high pressures exerted from the ram. Operation
hazards such as pinching, ejection of parts are always present. Please think about the
safety warnings in the instruction manual before operating the machine.
Misuse of this machine will void warranty and cause unsafe working
conditions.
2. FOR SAFE OPERATION
For your own safety read the instruction manual before operating your single
acting hydraulic press.
1. Keep hands out of point of operation.
2. Never hold part while pressing.
3. Always wear the eye protection.
4. Clamp work piece or brace when pressing.
5. Never place fingers in pin holes.
6. Always use nose piece when pressing. Never press using the end of the
ram, damage to ram or threads can occur.
7. Never use a press that is not fastened securely to the floor or workbench.
8. Always used table pins and accessories furnished with press.
9. Always have firm footing when operating press.
10. Do not use press if parts are damaged or missing. (Hoses, structural
components)

• SAFETY POINTS

Operation of the press incorrectly, or in a dangerous
fashion can result in serious injury or death.
Operation of the press incorrectly, or in a dangerous
fashion can result in damage to machine or it's
components and to the cutting tool.
Instructions
3
for safe press use.