Specifications; Safety - Dake 50H Instruction Manual

SPECIFICATIONS

Number
Capacity
Width between uprights
Width between table channels
Min ram to table
Max ram to table
In the space provided record the serial number and model number of the machine. This
information is only found on the black and gold Dake tag shown below. If contacting Dake this
information must be provided to assist in identifying the specific machine.

SAFETY

Employer is responsible to perform a hazard/PPE assessment before work activity.
Follow recommended precautions and safe operating practices.
Additional Warnings:
• Carefully read all safety messages in these instructions and on your press safety
signs.
• Keep safety labels in good condition. Replace missing or damaged safety labels.
• Employer is responsible to perform a hazard/PPE assessment before work activity.
• Do not alter this press from its original design.
• Do not make repairs or adjustments to any hydraulic system unless you are competent
or working under competent supervision.
• Only use Dake original parts.
907002
Ram travel
907002
50 tons Screw travel
Horizontal work head travel
32-3/4"
7-1/4" Height
Weight
5"
40" Base
Serial No.
Model No.
Install Date:
6
Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
4"
7"
20-3/4"
85"
810 lbs
43-1/2" x 36"
REV012021