Table of Contents
Advertisement
SAFETY
This is the safety alert symbol. When you see this symbol on your machine be alert to
the potential for personal injury.
Carefully read all safety messages in these instructions and on your machine safety
signs. Keep safety labels in good condition. Replace missing or damaged labels.
Employer is responsible to perform a hazard/PPE assessment before work activity.
Label Part No.
84395
Additional Safety Warnings:
• Keep guards in place and in working order.
• Remove adjusting key and wrenches, be in the habit of checking to see that keys and
adjusting wrenched are removed from tool before turning on.
• Keep work area clean. Cluttered areas and benches invite accidents.
• Do not use in dangerous environments. Do not use in damp or wet locations or expose
them to rain.
• Do not force tool. Machine will do a better and safer job at the rate for which it was
designed.
• Use the right tool. Do not force the tool or use the machine to do a job for which it was
not designed.
977102-1
Label Part No.
76462
Label Part No.
300168
6
Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
Label Part No.
82199
REV112019
Advertisement
Table of Contents
