5. Close the cover of the connection element. Then push the locking slide forwards as far as
it will go.
6. Screw the BusAdapter BA 2×FC to the PROFINET device (1 screw with 0.2 Nm
tightening torque). To do this, use a screwdriver with a 3 to 3.5 mm blade, alternatively
TX10.
①
Locking slide
②
Wire guide
Figure 5-3
Connection of the PROFINET IO BusAdapter BA 2×FC
BusAdapter
Manual, 03/2018, A5E41449003-AA
③
Shield contact
④
PROFINET connecting cable
BusAdapter BA 2xFC
5.2 Connecting
23