Connecting - Siemens SIMATIC ET 200SP Manual

BusAdapter BA 2xSCRJ

6.2 Connecting

6.2 Connecting
Installing the bus connector
Install the PROFINET connector according to the instructions in the PROFINET Installation
Guide (http://www.profibus.com/).
Tools required
3 to 3.5 mm screwdriver, alternatively TX10 (torx).
Accessories required
● Connector for PROFINET connection: IE SCRJ POF Plug
● Fiber-optic cable:
– IE POF standard cable (6XV1874-2A)
– IE POF trailing cable (6XV1874-2B)
– IE PCF standard cable (6XV1861-2A)
– IE PCF trailing cable (6XV1861-2C)
– IE PCF trailing cable, GI (6XV1861-2D)
28
BusAdapter
Manual, 03/2018, A5E41449003-AA