Siemens SIMATIC ET 200SP Manual page 32

BusAdapter BA 2×SCRJ installed
①
②
③
Figure 6-2
Reusing used fiber-optic cables
Note
Shorten both fiber-optic cores by the amount of the curved lengths and reassemble the
connectors. This will prevent any attenuation losses caused by re-bent, heavily stressed
portions of the fiber-optic cores.
Reference
For more information on the installation guidelines for fiber-optic cables, refer to the
SIMATIC NET PROFIBUS Network Manual
(https://support.industry.siemens.com/cs/de/de/view/1172302).
BusAdapter
Manual, 03/2018, A5E41449003-AA
Interface module
BusAdapter BA 2xSCRJ
PROFINET connecting cable (fiber-optic cable)
BusAdapter BA 2×SCRJ connected to interface module (using ET 200SP interface
module as an example)
BusAdapter BA 2xSCRJ
6.2 Connecting
31