Siemens SINUMERIK 840DE sl Commissioning Manual page 98

8 Tool Management
8.5 Display machine data
8.5 Display machine data
8-98
Display machine data can be used to activate certain functions and settings at
the operator interface.
MD 9450
$MM_WRITE_TOA_FINE_LIMIT
Limit value for fine wear
MD 9478
$MM_TO_OPTION_MASK
Settings for ShopMill
MD 9639
$MM_CTM_MAX_T OOL_WEAR
Upper input limit for tool wear
MD 9651
$MM_CMM_TOOL_MANAGEMENT
Tool management variant
MD 9652
$MM_CMM_TOOL_LIFE_CONTROL
Tool monitoring
MD 9661
$MM_CMM_ENABLE_CUST OMER_M_CODES
Number of input fields for tool–specific functions
MD 9663
$MM_CMM_TOOL_DISPLAY_IN_DIAM
Radius/diameter display for tool
MD 9667
$MM_CMM_FOLLOW_ON_T OOL_ACTIVE
Tool preselection active
MD 9671
$MM_CMM_TOOL_LOAD_DEFAULT_MAG
Load tool in default magazine
MD 9672
$MM_CMM_FIXED_T OOL_PLACE
Fixed location coding
MD 9673
$MM_CMM_TOOL_LOAD_STATION
Number of loading point
MD 9674
$MM_CMM_ENABLE_T OOL_MAGAZINE
Display of magazine list
MD 9687
$MM_CMM_TOOL_MOVE_DEFAULT_MAG
Relocate tool to default magazine
The default setting and machine data description can be found in Section 7.2
"Display Machine Data for ShopMill".
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
© Siemens AG 2006 All Rights Reserved
11/2006