Siemens SINUMERIK 840DE sl Commissioning Manual page 60

7 Machine Data
7.2 Display machine data for ShopMill
9705
MD number
Default setting: 4
Change becomes effective after: IMMEDIATELY
Data type: UBYTE
Significance:
9706
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9707
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
9708
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: BYTE
Significance:
7-60
$MM_CMM_INDEX_SPINDLE
Axis index for spindle
Min. input limit: 0
Protection level: 3/4
The number of the channel axis is entered in this MD.
$MM_CMM_GEOAX_ASSIGN_AXIS_4
Assignment of 4th axis to geometry axis
Min. input limit: 0
Protection level: 3/4
In this MD, the 4th axis is assigned a geometry axis. The assignment becomes necessary
if you are using the angle offset parameter when measuring a workpiece.
0 = no assignment
1 = 4th axis in the direction of the 1st geometry axis (X) –> A axis
2 = 4th axis in the direction of the 2nd geometry axis (Y) –> B axis
3 = 4th axis in the direction of the 3rd geometry axis (Z) –> C axis
$MM_CMM_GEOAX_ASSIGN_AXIS_5
Assignment of 5th axis to geometry axis
Min. input limit: 0
Protection level: 3/4
In this MD, the 5th axis is assigned a geometry axis. The assignment becomes necessary
if you are using the angle offset parameter when measuring a workpiece.
0 = no assignment
1 = 5th axis in the direction of the 1st geometry axis (X) –> A axis
2 = 5th axis in the direction of the 2nd geometry axis (Y) –> B axis
3 = 5th axis in the direction of the 3rd geometry axis (Z) –> C axis
$MM_CMM_INDEX_SPINDLE_2
Axis index for 2nd spindle (front spindle)
Min. input limit: 1
Protection level: 3/4
The number of the channel axis for the front axis is entered in this MD.
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
Max. input limit: 127
Units: –
Valid as of software version
ShopMill 5.3
Max. input limit: 3
Units: –
Valid as of software version
ShopMill 6.4
Max. input limit: 3
Units: –
Valid as of software version
ShopMill 6.4
Max. input limit: 127
Units: –
Valid as of software version
ShopMill 6.4
© Siemens AG 2006 All Rights Reserved
11/2006