Siemens SINUMERIK 840DE sl Commissioning Manual page 59

11/2006
9682
MD number
Default setting: 1
Change becomes effective after: IMMEDIATELY
Data type: DOUBLE
Significance:
9686
MD number
Default setting: 9
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9687
MD number
Default setting: 0
Change becomes effective after: POWER ON
Data type: BYTE
Significance:
9688
MD number
Default setting: 1
Change becomes effective after: IMMEDIATELY
Data type: LONG
Significance:
9703
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: UBYTE
Significance:
9704
MD number
Default setting: 0
Change becomes effective after: IMMEDIATELY
Data type: UBYTE
Significance:
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl Commissioning Manual CNC: ShopMill – 11/2006 Edition
$MM_CMM_CYC_BGF_BORE_DIST
Preboring depth for drill and thread milling
Min. input limit: 0
Protection level: 3/4
This MD defines the preboring depth for drill and thread milling.
$MM_CMM_M_CODE_COOLANT_OFF
M function for coolant OFF
Min. input limit: 0
Protection level: 3/4
This MD is used to stipulate the M function for switching the coolant OFF; this is output
when the tool is changed.
$MM_CMM_TOOL_MOVE_DEFAULT_MAG
Reload tool in default magazine
Min. input limit: 0
Protection level: 3/4
In this MD you define the magazine in which ShopMill first searches for an empty location
when relocating a tool.
$MM_CMM_COUNT_GEAR_STEPS_S2
Number of gear stages for the 2nd spindle (front spindle)
Min. input limit: 0
Protection level: 3/4
This MD is for setting the number of gear stages (0 to 5) for the front spindle. The possibility
of input in the operator interface is thus restricted.
$MM_CMM_INDEX_AXIS_4
Axis index for 4th axis
Min. input limit: 0
Protection level: 3/4
The number of the channel axis is entered in this MD.
$MM_CMM_INDEX_AXIS_5
Axis index for 5th axis
Min. input limit: 0
Protection level: 3/4
The number of the channel axis is entered in this MD.
7.2 Display machine data for ShopMill
Max. input limit: 100
Units: mm
Valid as of software version
ShopMill 6.2
Max. input limit: 32767
Units: –
Valid as of software version
ShopMill 6.2
Max. input limit: 30
Units: –
Valid as of software version
ShopMill 6.3
Max. input limit: 5
Units: –
Valid as of software version
ShopMill 6.4
Max. input limit: 127
Units: –
Valid as of software version
ShopMill 5.3
Max. input limit: 127
Units: –
Valid as of software version
ShopMill 5.3
7 Machine Data
7-59